Инструменты пользователя

Инструменты сайта


wiki:ff:comexpress:start

Различия

Показаны различия между двумя версиями страницы.

Ссылка на это сравнение

Предыдущая версия справа и слеваПредыдущая версия
Следующая версия
Предыдущая версия
wiki:ff:comexpress:start [2025/06/05 11:33] Roman Abakumovwiki:ff:comexpress:start [2025/07/17 21:47] (текущий) Roman Abakumov
Строка 1: Строка 1:
 +<const>
 +msg_vcc_12v=Primary power input: +12V nominal. Refer to Section 7 “Electrical Specifications“ for allowable input range. All available VCC_12V pins on the connector(s) shall be used.\\ **The Mini Module shall support a wide range power supply of 4.75V to 20.0V.**\\ In addition, the Mini Module shall be optimized for 5V operation and Module vendors should report Module power figures at 5V, 12V and 18V input voltages.
 +msg_gnd=Ground - DC power and signal and AC signal return path. All available GND connector pins shall be used and tied to Carrier Board GND plane.
 +</const>
 +
 ===== COM Express ===== ===== COM Express =====
 {{ :wiki:ff:comexpress:comexpress.jpg?320&nolink }} {{ :wiki:ff:comexpress:comexpress.jpg?320&nolink }}
Строка 6: Строка 11:
 Страничка стандарта: https://www.picmg.org/openstandards/com-express/ Страничка стандарта: https://www.picmg.org/openstandards/com-express/
  
-Два типоразмера:  +Документация
- +| Папка | | [[https://doc.inmys.ru/list?id=22682|link]] | 
-Разъём -  +| ||| 
- +| PICMG® COM.0 Revision 3 COM Express® Module Base Specification | PICMG | [[https://doc.inmys.ru/hash/0ab741addf5500fdfca3adc66c68fd45/PICMG_COM_0R3_0.pdf|link]] | 
-Версии стандарта +| ||| 
 +| COM Express® Carrier Design Guide | PICMG | [[https://doc.inmys.ru/hash/b753474f6e79c4002d90d87394fb72cf/PICMG_COMDG_2.0-RELEASED-2013-12-061.pdf|link]] |  
 +| Design Guide for COM Express Type 6,7 & Type 10 Carrier Board | AAEON | [[https://doc.inmys.ru/hash/be333e0df0a33af1056bd16027d419ed/COM_Express_Carrier_Board_Design_Guide_V1.2.pdf|link]]| 
 +| COM EXPRESS CARRIER BOARD DESIGN GUIDE | iBASE | [[https://doc.inmys.ru/hash/a7fb63009620fbc4bdd7fe3d42b038b2/COMe_Carrier_Board_Design_Guide_V1.0.pdf|link]] |
  
 {{tablelayout?rowsHeaderSource=Auto&colwidth=""}} {{tablelayout?rowsHeaderSource=Auto&colwidth=""}}
Строка 23: Строка 30:
 | 7     | AB & CD     | 32          | Yes  | Yes  | 2     | No        | 4x 10G (CEI side-band)\\ 1 GbE  | None                                      | 2x RX/TX or CAN        | 4x USB 3.2/2.0\\ 4x USB 2.0  |         | *  | | 7     | AB & CD     | 32          | Yes  | Yes  | 2     | No        | 4x 10G (CEI side-band)\\ 1 GbE  | None                                      | 2x RX/TX or CAN        | 4x USB 3.2/2.0\\ 4x USB 2.0  |         | *  |
 | 10    | AB only     | 4           | No   | No   | 2     | No        | 1 GbE                           | 1x DDI, LVDS                              | 2x RX/TX, GP_SPI, CAN  | 4x USB 3.2/2.0                       | *  | | 10    | AB only     | 4           | No   | No   | 2     | No        | 1 GbE                           | 1x DDI, LVDS                              | 2x RX/TX, GP_SPI, CAN  | 4x USB 3.2/2.0                       | *  |
 +
 +
 +  * TYPE 2 Basic / Compact
 +  * TYPE 6 Basic / Compact
 +  * TYPE 7 Basic
 +  * TYPE 10 Mini
 +  
  
 ===== Производители ===== ===== Производители =====
Строка 36: Строка 50:
 {{anchor:products}} {{anchor:products}}
 ===== Продукты ===== ===== Продукты =====
-| PCOM-B634VG | [[https://www.portwell.com/pdf/embedded/PCOM-B634VG.pdf|link]] | Portwell | Intel® new gen. Xeon Processor D based Type VI COM Express 2.0 module with DDR4 ECC SDRAM on three SO-DIMM slotsVGA10 Gigabit EthernetSATA and USB 3.0 |+---- datatable ---- 
 +cols    : pic_img64struct_img64%pageid%pn, formfactor, manufacturer, cpu_wiki, emmc, ram, temprange, dp, hdmi, lvds, ethernet, dsi, csi, usb2, usb3, pcie, can, spi, i2c, smbus, uart, dimension, bios, datasheet_wiki, page_wiki 
 +headers : img,       struct,       link,     pn, formfactor, manufacturer, cpu,      emmc, ram, temprange, dp, hdmi, lvds, ethernet, dsi, csi, usb2, usb3, pcie, can, spi, i2c, smbus, uart, dimension, bios, datasheet_wiki, page_wiki 
 +filter  : %class%=som 
 +filter  : formfactor*~COM Express 
 +sort    : %pageid% 
 +dynfilters : 1 
 +----
  
  
Строка 62: Строка 83:
 {{anchor:connector}} {{anchor:connector}}
 ===== Разъём ===== ===== Разъём =====
-{{tablelayout?rowsHeaderSource=Auto&colwidth="220px,266px,110px,110px,102px,128px,397px,107px,215px"&tableSort=1&tableSearch=1}} 
-^ Pin #  ^ Name               ^ Group  ^ I/O Type  ^ I/O Level  ^ PU / PD  ^ Description                       ^ Power Domain  ^ Comments  ^ 
-| A1     | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A2     | GBE0_MDI3-                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A3     | GBE0_MDI3+                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A4     | GBE0_LINK100#      |        | Output    |            |          | GBE Port 0 (P1B)                  |                         | 
-| A5     | GBE0_LINK1000#            | Output    |            |          | GBE Port 0 (P1B)                  |                         | 
-| A6     | GBE0_MDI2-                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A7     | GBE0_MDI2+                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A8     | GBE0_LINK#                | Output    |            |          | GBE Port 0 (P1B)                  |                         | 
-| A9     | GBE0_MDI1-                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A10    | GBE0_MDI1+                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A11    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A12    | GBE0_MDI0-                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A13    | GBE0_MDI0+                | I/O                  |          | GBE Port 0 (P1B)                  |                         | 
-| A14    | GBE0_CTREF                | Output    |            |          | GBE Port 0 (P1B)                  |                         | 
-| A15    | SUS_S3#            |        | Output    |            |          | System Header (P12)                                       | 
-| A16    | SATA0_TX+          |        | Output    |            |          | mSATA (U12)                                               | 
-| A17    | SATA0_TX-          |        | Output    |            |          | mSATA (U12)                                               | 
-| A18    | SUS_S4#            |        | Output    |            |          | NC                                |                         | 
-| A19    | SATA0_RX+          |        | Input                |          | mSATA (U12)                                               | 
-| A20    | SATA0_RX-          |        | Input                |          | mSATA (U12)                                               | 
-| A21    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A22    | USB_SSRX0-                | Input                |          | USB 3.0 Port 0 (P6)                                       | 
-| A23    | USB_SSRX0+                | Input                |          | USB 3.0 Port 0 (P6)                                       | 
-| A24    | SUS_S5#            |        | Output    |            |          | NC                                |                         | 
-| A25    | USB_SSRX1-                | Input                |          | USB 3.0 Port 1 (P6)                                       | 
-| A26    | USB_SSRX1+                | Input                |          | USB 3.0 Port 1 (P6)                                       | 
-| A27    | BATLOW#            |        | Input                |          | System Header (P12)                                       | 
-| A28    | SATA_ACT#          |        | Output    |            |          | NC                                |                         | 
-| A29    | HDA_SYNC                  | Output    |            |          | HD Audio (P13)                    |                         | 
-| A30    | HDA_RST#                  | Output    |            |          | HD Audio (P13)                    |                         | 
-| A31    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A32    | HDA_BITCLK                | Output    |            |          | HD Audio (P13)                    |                         | 
-| A33    | HDA_SDOUT          |        | Output    |            |          | HD Audio (P13)                    |                         | 
-| A34    | BIOS_DISABLE#      |        | Input                |          | NC                                |                         | 
-| A35    | THRMTRIP#          |        | Output    |            |          | NC                                |                         | 
-| A36    | USB6-              |        | I/O                  |          | NC                                |                         | 
-| A37    | USB6+              |        | I/O                  |          | NC                                |                         | 
-| A38    | USB_6_7_OC#        |        | Input                |          | PU                                |                         | 
-| A39    | USB4-              |        | I/O                  |          | miniPCIe Slot 0 (U12)                                     | 
-| A40    | USB4+              |        | I/O                  |          | miniPCIe Slot 0 (U12)                                     | 
-| A41    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A42    | USB2-              |        | I/O                  |          | USB 2.0 Port 2 (P14)              |                         | 
-| A43    | USB2+              |        | I/O                  |          | USB 2.0 Port 2 (P14)              |                         | 
-| A44    | USB_2_3_OC#        |        | Input                |          | USB 2.0 Port 2/3 Overcurrent      |                         | 
-| A45    | USB0-              |        | I/O                  |          | USB 2.0 Port 0 (P6)                                       | 
-| A46    | USB0+              |        | I/O                  |          | USB 2.0 Port 0 (P6)                                       | 
-| A47    | VCC_RTC            |        | Power                |          | RTC Battery (P5)                  |                         | 
-| A48    | EXCD0_PERST#              | Output    |            |          | NC                                |                         | 
-| A49    | EXCD0_CPPE#        |        | Input                |          | NC                                |                         | 
-| A50    | LPC_SERIRQ                | I/O                  |          | NC                                |                         | 
-| A51    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A52    | RSVD                      | Passive              |          | NC                                |                         | 
-| A53    | RSVD                      | Passive              |          | NC                                |                         | 
-| A54    | GPI0                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| A55    | RSVD                      | Passive              |          | NC                                |                         | 
-| A56    | RSVD                      | Passive              |          | NC                                |                         | 
-| A57    | GND                |        | Power                |          | GND                                                       | 
-| A58    | PCIE_TX3+          |        | Output    |            |          | NC                                |                         | 
-| A59    | PCIE_TX3-          |        | Output    |            |          | NC                                |                         | 
-| A60    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A61    | PCIE_TX2+          |        | Output    |            |          | miniPCIe Slot 1 (U19)                                     | 
-| A62    | PCIE_TX2-          |        | Output    |            |          | miniPCIe Slot 1 (U19)                                     | 
-| A63    | GPI1                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| A64    | PCIE_TX1+          |        | Output    |            |          | miniPCIe Slot 0 (U12)                                     | 
-| A65    | PCIE_TX1-          |        | Output    |            |          | miniPCIe Slot 0 (U12)                                     | 
-| A66    | GND                |        | Power                |          | GND                                                       | 
-| A67    | GPI2                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| A68    | PCIE_TX0+          |        | Output    |            |          | GBE PHY Controller                |                         | 
-| A69    | PCIE_TX0-          |        | Output    |            |          | GBE PHY Controller                |                         | 
-| A70    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A71    | LVDS_A0+                  | Output    |            |          | LVDS Video (P9)                                           | 
-| A72    | LVDS_A0-                  | Output    |            |          | LVDS Video (P9)                                           | 
-| A73    | LVDS_A1+                  | Output    |            |          | LVDS Video (P9)                                           | 
-| A74    | LVDS_A1-                  | Output    |            |          | LVDS Video (P9)                                           | 
-| A75    | LVDS_A2+                  | Output    |            |          | LVDS Video (P9)                                           | 
-| A76    | LVDS_A2-                  | Output    |            |          | LVDS Video (P9)                                           | 
-| A77    | LVDS_VDD_EN        |        | Output    |            |          | LVDS Video (P9)                                           | 
-| A78    | LVDS_A3+                  | Power                |          | NC                                |                         | 
-| A79    | LVDS_A3-                  | Power                |          | NC                                |                         | 
-| A80    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A81    | LVDS_A_CK+                | Output    |            |          | LVDS Video (P9)                                           | 
-| A82    | LVDS_A_CK-                | Output    |            |          | LVDS Video (P9)                                           | 
-| A83    | LVDS_I2C_CK        |        | Output    |            |          | NC                                |                         | 
-| A84    | LVDS_I2C_DAT              | I/O                  |          | NC                                |                         | 
-| A85    | GPI3                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| A86    | RSVD                      | Passive              |          | NC                                |                         | 
-| A87    | EDP_HPD            |        | Passive              |          | NC                                |                         | 
-| A88    | PCIE_CLK_REF+      |        | Output    |            |          | Main Carrier PCIe Clock                                   | 
-| A89    | PCIE_CLK_REF-      |        | Output    |            |          | Main Carrier PCIe Clock                                   | 
-| A90    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A91    | SPI_PWR            |        | Power                |          | NC                                |                         | 
-| A92    | SPI_MISO                  | Power                |          | NC                                |                         | 
-| A93    | GPO0                      | I/O                  |          | GPIO (P12) OR SD Card (P3)        |                         | 
-| A94    | SPI_CLK            |        | Power                |          | NC                                |                         | 
-| A95    | SPI_MOSI                  | Power                |          | NC                                |                         | 
-| A96    | TPM_PP                    | Input                |          | NC                                |                         | 
-| A97    | TYPE10#            |        | Power                |          | NC                                |                         | 
-| A98    | SER0_TX            |        | Output    |            |          | Serial Port 0 (P7)                |                         | 
-| A99    | SER0_RX            |        | Input                |          | Serial Port 0 (P7)                |                         | 
-| A100   | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| A101   | SER1_TX/CAN_TX            | Output    |            |          | Serial Port 1 (P7)                |                         | 
-| A102   | SER1_RX/CAN_RX            | Input                |          | Serial Port 1 (P7)                |                         | 
-| A103   | LID#                      | Input                |          | NC                                |                         | 
-| A104   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| A105   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| A106   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| A107   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| A108   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| A109   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| A110   | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B1     | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B2     | GBE0_ACT#          |        | Output    |            |          | GBE Port 0 (P1B)                  |                         | 
-| B3     | LPC_FRAME#                | Output    |            |          | NC                                |                         | 
-| B4     | LPC_AD0            |        | I/O                  |          | NC                                |                         | 
-| B5     | LPC_AD1            |        | I/O                  |          | NC                                |                         | 
-| B6     | LPC_AD2            |        | I/O                  |          | NC                                |                         | 
-| B7     | LPC_AD3            |        | I/O                  |          | NC                                |                         | 
-| B8     | LPC_DRQ0#          |        | Input                |          | NC                                |                         | 
-| B9     | LPC_DRQ1#          |        | Input                |          | NC                                |                         | 
-| B10    | LPC_CLK            |        | Output    |            |          | NC                                |                         | 
-| B11    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B12    | PWRBTN#            |        | Input                |          | System Header (P12)                                       | 
-| B13    | SMB_CK                    | I/O                  |          | System Header (P12)                                       | 
-| B14    | SMB_DAT            |        | I/O                  |          | System Header (P12)                                       | 
-| B15    | SMB_ALERT#                | Input                |          | System Header (P12)                                       | 
-| B16    | SATA1_TX+          |        | Output    |            |          | NC                                |                         | 
-| B17    | SATA1_TX-          |        | Output    |            |          | NC                                |                         | 
-| B18    | SUS_STAT#          |        | Output    |            |          | NC                                |                         | 
-| B19    | SATA1_RX+          |        | Input                |          | NC                                |                         | 
-| B20    | SATA1_RX-          |        | Input                |          | NC                                |                         | 
-| B21    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B22    | USB_SSTX0-                | Output    |            |          | USB 3.0 Port 0 (P6)                                       | 
-| B23    | USB_SSTX0+                | Output    |            |          | USB 3.0 Port 0 (P6)                                       | 
-| B24    | PWR_OK                    | Input                |          | Carrier Board Internal Circuitry  |                         | 
-| B25    | USB_SSTX1-                | Output    |            |          | USB 3.0 Port 1 (P6)                                       | 
-| B26    | USB_SSTX1+                | Output    |            |          | USB 3.0 Port 1 (P6)                                       | 
-| B27    | WDT                |        | Output    |            |          | NC                                |                         | 
-| B28    | HDA_SDIN2          |        | Input                |          | PD                                |                         | 
-| B29    | HDA_SDIN1          |        | Input                |          | PD                                |                         | 
-| B30    | HDA_SDIN0          |        | Input                |          | HD Audio (P13)                    |                         | 
-| B31    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B32    | SPKR                      | Output    |            |          | NC                                |                         | 
-| B33    | I2C_CK                    | Output    |            |          | System Header (P12)                                       | 
-| B34    | I2C_DAT            |        | I/O                  |          | System Header (P12)                                       | 
-| B35    | THRM#              |        | Input                |          | PU                                |                         | 
-| B36    | USB7-              |        | I/O                  |          | NC                                |                         | 
-| B37    | USB7+              |        | I/O                  |          | NC                                |                         | 
-| B38    | USB_4_5_OC#        |        | Input                |          | PU                                |                         | 
-| B39    | USB5-              |        | I/O                  |          | miniPCIe Slot 1 (U19)                                     | 
-| B40    | USB5+              |        | I/O                  |          | miniPCIe Slot 1 (U19)                                     | 
-| B41    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B42    | USB3-              |        | I/O                  |          | USB 2.0 Port 3 (P14)              |                         | 
-| B43    | USB3+              |        | I/O                  |          | USB 2.0 Port 3 (P14)              |                         | 
-| B44    | USB_0_1_OC#        |        | Input                |          | USB 2.0 Port 0/1 Overcurrent      |                         | 
-| B45    | USB1-              |        | I/O                  |          | USB 2.0 Port 1 (P14)              |                         | 
-| B46    | USB1+              |        | I/O                  |          | USB 2.0 Port 1 (P14)              |                         | 
-| B47    | EXCD1_PERST#              | Output    |            |          | NC                                |                         | 
-| B48    | EXCD1_CPPE#        |        | Input                |          | NC                                |                         | 
-| B49    | SYS_RESET#                | Input                |          | System Header (P12)                                       | 
-| B50    | CB_RESET#          |        | Output    |            |          | Carrier Board Internal Circuitry  |                         | 
-| B51    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B52    | RSVD                      | Passive              |          | NC                                |                         | 
-| B53    | RSVD                      | Passive              |          | NC                                |                         | 
-| B54    | GPO1                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| B55    | RSVD                      | Passive              |          | NC                                |                         | 
-| B56    | RSVD                      | Passive              |          | NC                                |                         | 
-| B57    | GPO2                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| B58    | PCIE_RX3+          |        | Input                |          | NC                                |                         | 
-| B59    | PCIE_RX3-          |        | Input                |          | NC                                |                         | 
-| B60    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B61    | PCIE_RX2+          |        | Input                |          | miniPCIe Slot 1 (U19)                                     | 
-| B62    | PCIE_RX2-          |        | Input                |          | miniPCIe Slot 1 (U19)                                     | 
-| B63    | GPO3                      | I/O                  |          | MISC (P12) OR SD Card (P3)        |                         | 
-| B64    | PCIE_RX1+          |        | Input                |          | miniPCIe Slot 0 (U12)                                     | 
-| B65    | PCIE_RX1-          |        | Input                |          | miniPCIe Slot 0 (U12)                                     | 
-| B66    | WAKE0#                    | Input                |          | PU                                |                         | 
-| B67    | WAKE1#                    | Input                |          | PU                                |                         | 
-| B68    | PCIE_RX0+          |        | Input                |          | GBE Port 1 (P1B)                  |                         | 
-| B69    | PCIE_RX0-          |        | Input                |          | GBE Port 1 (P1B)                  |                         | 
-| B70    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B71    | DDI0_PAIR0+        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B72    | DDI0_PAIR0-        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B73    | DDI0_PAIR1+        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B74    | DDI0_PAIR1-        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B75    | DDI0_PAIR2+        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B76    | DDI0_PAIR2-        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B77    | DDI0_PAIR4+        |        | Output    |            |          | NC                                |                         | 
-| B78    | DDI0_PAIR4-        |        | Output    |            |          | NC                                |                         | 
-| B79    | LVDS_BKLT_EN              | Output    |            |          | LVDS Backlight Power (P10)        |                         | 
-| B80    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B81    | DDI0_PAIR3+        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B82    | DDI0_PAIR3-        |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B83    | LVDS_BKLT_CTRL            | Output    |            |          | LVDS Video (P9)                                           | 
-| B84    | VCC_5V_SBY                | Power                |          | Carrier Board Internal Circuitry  |                         | 
-| B85    | VCC_5V_SBY                | Power                |          | Carrier Board Internal Circuitry  |                         | 
-| B86    | VCC_5V_SBY                | Power                |          | Carrier Board Internal Circuitry  |                         | 
-| B87    | VCC_5V_SBY                | Power                |          | Carrier Board Internal Circuitry  |                         | 
-| B88    | BIOS_DIS1#                | Input                |          | NC                                |                         | 
-| B89    | DD0_HPD            |        | Output    |            |          | HDMI (P11)                        |                         | 
-| B90    | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B91    | DDI0_PAIR5+        |        | Output    |            |          | NC                                |                         | 
-| B92    | DDI0_PAIR5-        |        | Output    |            |          | NC                                |                         | 
-| B93    | DDI0_PAIR6+        |        | Output    |            |          | NC                                |                         | 
-| B94    | DDI0_PAIR6-        |        | Output    |            |          | NC                                |                         | 
-| B95    | DDI0_DDC_AUX_SEL          | Input                |          | HDMI (P11)                        |                         | 
-| B96    | USB_HOST_PRSNT            | Input                |          | PU                                |                         | 
-| B97    | SPI_CS#            |        | Passive              |          | NC                                |                         | 
-| B98    | DDI0_CTRLCLK_AUX+  |        | I/O                  |          | HDMI (P11)                        |                         | 
-| B99    | DDI0_CTRLCLK_AUX-  |        | I/O                  |          | HDMI (P11)                        |                         | 
-| B100   | GND (FIXED)        |        | Power                |          | GND                                                       | 
-| B101   | FAN_PWMOUT                | Output    |            |          | NC                                |                         | 
-| B102   | FAN_TACHIN                | Input                |          | NC                                |                         | 
-| B103   | SLEEP#                    | Input                |          | NC                                |                         | 
-| B104   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| B105   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| B106   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| B107   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| B108   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| B109   | VCC_12V            |        | Power                |          | Input Power +VIN (P4)                                     | 
-| B110   | GND (FIXED)        |        | Power                |          | GND                                                       | 
  
 +| module | single | | Tyco Electronics | 3-6318490-6      | [[https://doc.inmys.ru/hash/0060691baea77c2804b287865654ba76/7FENG_CD_6318490_B2.pdf|link]]\\ [[https://doc.inmys.ru/hash/ac7fe953faa1657a4246c5d3df9dfce2/3-6318490-6--3DModel-STEP-1.STEP|step]] | {{:wiki:ff:comexpress.png?320&direct}} |
 +| module | single | | Foxconn          | QT012206-1031-2H | | ::: |
 +| module | single | | ept              | 402-51101-51     | | ::: |
 +| module | single | | KLS              | L-KLS1-B0705-545F220-T3R ???? | [[https://doc.inmys.ru/hash/5d57fd01e9b0e647f4ddbbdaf257b2d4/kls~l-kls1-b0705-545f220-t3r.pdf|link]] | ::: |
 +| |||||||
 +| module | double | | Tyco Electronics | 3-1827231-6      | [[https://doc.inmys.ru/hash/9f12329e10f8143c0598296b8f3f779b/ENG_CD_1827231_F1-2021083.pdf|link]] | |
 +| module | double | | Foxconn          | QT012206-1041-3H | | |
 +| module | double | | ept              | 402-51501-51     | | |
 +| |||||||
 +| carrier | single | 5mm | Tyco Electronics | 3-1827253-6      | [[https://doc.inmys.ru/hash/5c7aff7efb716086c9c143ebb76daf25/ENG_CD_1827253_D.pdf|link]] | {{:wiki:ff:comexpress1.png?320&direct}} | 
 +| carrier | single | 5mm | Foxconn          | QT002206-2131-3H | | ::: |
 +| carrier | single | 5mm | ept              | 401-51101-51     | | ::: |
 +| |||||||
 +| carrier | double | 5mm | Tyco Electronics | 3-1827233-6      | [[https://doc.inmys.ru/hash/60782a6c2163491de3a88d3c04c72d97/3-1827233-6.pdf|link]] |  |
 +| carrier | double | 5mm | Foxconn          | QT002206-2141-3H | | |
 +| carrier | double | 5mm | ept              | 401-51501-51     | | |
 +| |||||||
 +| carrier | single | 8mm | Tyco Electronics | 3-6318491-6      | [[https://doc.inmys.ru/hash/34a76b17f773f107d9c05a6edba73c2d/7FENG_CD_6318491_D_baseFilename.pdf|link]] | | 
 +| carrier | single | 8mm | Foxconn          | QT002206-4131-3H | | |
 +| carrier | single | 8mm | ept              | 401-55101-51     | | |
 +| |||||||
 +| carrier | double | 8mm | Tyco Electronics | 3-5353652-6      | [[https://doc.inmys.ru/hash/742dfb8a8c603c3c9417d31635180e00/3-5353652-6.pdf|link]] | |
 +| carrier | double | 8mm | Foxconn          | QT002206-4141-3H | | |
 +| carrier | double | 8mm | ept              | 401-55501-51     | | |
 +
 +
 +==== Разъём AB ====
 +{{tablelayout?rowsHeaderSource=Auto&tableSort=1&tableSearch=1}}
 +^ Pin #  ^ Pin\\ Des  ^ Pin\\ Name                         ^ Group             ^ Pin Type                      ^ Pwr Rail \\ Tolerance                                            ^ Notes                                                            ^ Description                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ^
 +| 1      | A1         | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 3      | A2         | <color green>GBE0_MDI3-</color>    | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 5      | A3         | <color green>GBE0_MDI3+</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 7      | A4         | GBE0_LINK100#                      | GBE               | OD CMOS                       | 3.3V Suspend/ 3.3V                                                                                                                | Gigabit Ethernet Controller 0 100 Mbit / sec link indicator, active low                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                |
 +| 9      | A5         | GBE0_LINK1000#                     | GBE               | OD CMOS                       | 3.3V Suspend/ 3.3V                                                                                                                | Gigabit Ethernet Controller 0 1000 Mbit / sec link indicator, active low.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 11     | A6         | <color green>GBE0_MDI2-</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 13     | A7         | <color green>GBE0_MDI2+</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 15     | A8         | GBE0_LINK#                         | GBE               | OD CMOS                       | 3.3V Suspend/ 3.3V                                                                                                                | Gigabit Ethernet Controller 0 link indicator, active low.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 17     | A9         | <color green>GBE0_MDI1-</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 19     | A10        | <color green>GBE0_MDI1+</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 21     | A11        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 23     | A12        | <color green>GBE0_MDI0-</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 25     | A13        | <color green>GBE0_MDI0+</color>                         | GBE               | I/O Analog                    | 3.3V max Suspend                                                 | 100R routing ???                                                 | Gigabit Ethernet Controller 0: Media Dependent Interface Differential Pairs 0,1,2,3. The MDI can operate in 1000, 100 and 10 Mbit / sec modes. Some pairs are unused in some modes, per the following:  10,100Mbit — MDI0-TX, MDI1-RX                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 27     | A14        | GBE0_CTREF                         | GBE               | REF                           | GND min 3.3V max                                                 | 100nF cap to GND                                                 | Reference voltage for Carrier Board Ethernet channel 0 magnetics center tap. The reference voltage is determined by the requirements of the Module PHY and may be as low as 0V and as high as 3.3V. The reference voltage output shall be current limited on the Module. In the case in which the reference is shorted to ground, the current shall be limited to 250 mA or less.                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 29     | A15        | SUS_S3#                            | SYS           | O CMOS                        | 3.3V Suspend/ 3.3V                                               | PD 100k ???                                                      | Indicates system is in Suspend to RAM state. Active low output. An inverted copy of SUS_S3# on the Carrier Board may be used to enable the non-standby power on a typical ATX supply.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 31     | A16        | <color green>SATA0_TX+</color>                          | SATA              | O SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 10nf ac cap ???  | Serial ATA Channel 0 transmit differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 33     | A17        | <color green>SATA0_TX-</color>                          | SATA              | O SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 10nf ac cap ???  | Serial ATA Channel 0 transmit differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 35     | A18        | SUS_S4#                            | SYS           | O CMOS                        | 3.3V Suspend/ 3.3V                                               | PD 100k ???                                                      | Indicates system is in Suspend to Disk state. Active low output.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 37     | A19        | <color green>SATA0_RX+</color>                          | SATA              | I SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 10nf ac cap ???  | Serial ATA Channel 0 receive differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 39     | A20        | <color green>SATA0_RX-</color>                          | SATA              | I SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 10nf ac cap ???  | Serial ATA Channel 0 receive differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 41     | A21        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 43     | A22        | <color green>USB_SSRX0-</color>                         | USB               | I PCIE                        | AC coupled off Module                                            |                                                                  | Additional receive signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 45     | A23        | <color green>USB_SSRX0+</color>                         | USB               | I PCIE                        | AC coupled off Module                                            |                                                                  | Additional receive signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 47     | A24        | SUS_S5#                            | SYS           | O CMOS                        | 3.3V Suspend/ 3.3V                                               | PD 100k ???                                                      | Indicates system is in Soft Off state.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 49     | A25        | <color green>USB_SSRX1-</color>                         | USB               | I PCIE                        | AC coupled off Module                                            |                                                                  | Additional receive signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 51     | A26        | <color green>USB_SSRX1+</color>                         | USB               | I PCIE                        | AC coupled off Module                                            |                                                                  | Additional receive signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 53     | A27        | BATLOW#                            | SYS           | I CMOS                        | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 10K (S5)                                 | Indicates that external battery is low. This port provides a battery-low signal to the Module for orderly transitioning to power saving or power cut-off ACPI modes.\\ Assertion will prevent wake from S3-S5 state                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 55     | A28        | (S)ATA_ACT#                        | SATA              | I/O CMOS                      | 3.3V/3.3V                                                        | PU 10k 3.3V (S0) ???                                             | Serial ATA activity indicator, active low.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             |
 +| 57     | A29        | HDA_SYNC                           | HDA               | O CMOS                        | 3.3V/3.3V                                                        |                                                                  | Sample-synchronization signal to the CODEC(s)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 59     | A30        | HDA_RST#                           | HDA               | O CMOS                        | 3.3V Suspend/ 3.3V                                               | PD 100k ???                                                      | Reset output to CODEC, active low                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 61     | A31        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 63     | A32        | HDA_BITCLK                         | HDA               | I/O CMOS                      | 3.3V/3.3V                                                        | PD 100k ???                                                      | Serial data clock generated by the external CODEC(s).                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 65     | A33        | HDA_SDOUT                          | HDA               | O CMOS                        | 3.3V/3.3V                                                        |                                                                  | Serial TDM data output to the CODEC.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 67     | A34        | BIOS_DIS0#/ESPI_SAFS               | LPC\\ ESPI          | I CMOS                        | NA                                                               | PU to 3.3V (S5 ???) with 10K                                     | Selection strap to determine the BIOS boot device. The Carrier should only float these or pull them low, please refer to Table 4.13 for strapping options of BIOS disable signals.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 69     | A35        | THRMTRIP#                          | THERMAL           | O CMOS                        | 3.3V / 3.3V                                                      | PU to 3.3V (S0) with 10K ???                                     | Active low output indicating that the CPU has entered thermal shutdown.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                |
 +| 71     | A36        | <color green>USB6-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 73     | A37        | <color green>USB6+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 75     | A38        | USB_6_7_OC#                        | USB               | I CMOS                        | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 10K (S5)                                 | USB over-current sense, USB channels 6 and 7. A pull-up for this line shall be present on the Module. An open drain driver from a USB current monitor on the Carrier Board may drive this line low. Do not pull this line high on the Carrier Board.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 77     | A39        | <color green>USB4-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 79     | A40        | <color green>USB4+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 81     | A41        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 83     | A42        | <color green>USB2-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 85     | A43        | <color green>USB2+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 87     | A44        | USB_2_3_OC#                        | USB               | I CMOS                        | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 10K (S5)                                 | USB over-current sense, USB channels 2 and 3. A pull-up for this line shall be present on the Module. An open drain driver from a USB current monitor on the Carrier Board may drive this line low. Do not pull this line high on the Carrier Board.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 89     | A45        | <color green>USB0-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3.3V                                               | PD in PCH                                                        | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 91     | A46        | <color green>USB0+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                               | PD in PCH                                                        | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 93     | A47        | <color #ed1c24>VCC_RTC</color>     | PWR               | PWR INPUT                     | 2.8-3.47V                                                        |                                                                  | Real-time clock circuit-power input. Nominally +3 0V. Refer to Sec ion 7 “Electrical Specifications“ for details.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 95     | A48        | RSVD (RSMRST_OUT# ???)             | RSVD              | O-3.3V ???                    |                                                                  | PD 10K ???                                                       | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 97     | A49        | GBE0_SDP                           | GBE               | I/O                           | 3.3V Suspend/ 3.3V                                               | PD 10K ???                                                       | Gigabit Ethernet Controller 0 Software-Definable Pin. Can also be used for IEEE1588 support such as a 1pps signal. See section 4.3.5 for details.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 99     | A50        | LPC_SERIRQ/ESPI_CS1#               | LPC\\ ESPI          | LPC: I/O CMOS\\ ESPI: O CMOS  | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                       | PU to 3.3V with 8.2K\\ -                                         | **LPC**: LPC serial interrupt\\ **ESPI**: eSPI Master Chip Select Outputs Driving Chip Select# A low selects a particular eSPI slave for the transaction. Each of the eSPI slaves is connected to a dedicated Chip Selectn# pin.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 101    | A51        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 103    | A52        | RSVD                               | RSVD              | NC                            |                                                                  |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 105    | A53        | RSVD                               | RSVD              | NC                            |                                                                  |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 107    | A54        | GPI0                               | GPIO\\ SDIO       | I CMOS\\ IO CMOS              | 3.3V / 3.3V                                                      | PU 100K 3.3V (S0) ???\\ ?                                        | **GPIO**: GPI0, General purpose input pins. Pulled high internally on the Module.\\ **SDIO**: SDIO_DAT[0], SDIO Data lines. These signals operate in push-pull mode. Maps to GPI[0:3].                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 109    | A55        | RSVD (GP_SPI_CS# ???)              | RSVD              | O-3.3V ???                    |                                                                  |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 111    | A56        | RSVD (GP_SPI_CK ???)               | RSVD              | O-3.3V ???                    |                                                                  |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 113    | A57        | <color blue>GND</color>            | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 115    | A58        | <color green>PCIE_TX3+</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 117    | A59        | <color green>PCIE_TX3-</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 119    | A60        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 121    | A61        | <color green>PCIE_TX2+</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 123    | A62        | <color green>PCIE_TX2-</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 125    | A63        | GPI1                               | GPIO\\ SDIO       | I CMOS\\ IO CMOS              | 3.3V / 3.3V                                                      | PU 100K 3.3V (S0) ???\\ ?                                        | **GPIO**: GPI1, General purpose input pins. Pulled high internally on the Module.\\ **SDIO**: SDIO_DAT[1], SDIO Data lines. These signals operate in push-pull mode. Maps to GPI[0:3].                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 127    | A64        | <color green>PCIE_TX1+</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 129    | A65        | <color green>PCIE_TX1-</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 131    | A66        | <color blue>GND</color>            | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 133    | A67        | GPI2                               | GPIO\\ SDIO       | I CMOS\\ IO CMOS              | 3.3V / 3.3V                                                      | PU 100K 3.3V (S0) ???\\ ?                                        | **GPIO**: GPI2, General purpose input pins. Pulled high internally on the Module.\\ **SDIO**: SDIO_DAT[2], SDIO Data lines. These signals operate in push-pull mode. Maps to GPI[0:3].                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 135    | A68        | <color green>PCIE_TX0+</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 137    | A69        | <color green>PCIE_TX0-</color>                          | PCIE              | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R routing, 200nF            | PCI Express Differential Transmit Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 139    | A70        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 141    | A71        | <color green>LVDS_A0+</color>                           | LVDS\\ EDP        | O LVDS\\  O PCIE              | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A0+, LVDS Channel A differential pairs\\ **eDP**: eDP_TX2+, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 143    | A72        | <color green>LVDS_A0-</color>                           | LVDS\\ EDP        | O LVDS\\  O PCIE              | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A0-, LVDS Channel A differential pairs\\ **eDP**: eDP_TX2-, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 145    | A73        | <color green>LVDS_A1+</color>                           | LVDS\\ EDP        | O LVDS\\  O PCIE              | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A1+, LVDS Channel A differential pairs\\ **eDP**: eDP_TX1+, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 147    | A74        | <color green>LVDS_A1-</color>                           | LVDS\\ EDP        | O LVDS\\  O PCIE              | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A1-, LVDS Channel A differential pairs\\ **eDP**: eDP_TX1-, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 149    | A75        | <color green>LVDS_A2+</color>                           | LVDS\\ EDP        | O LVDS\\  O PCIE              | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A2+, LVDS Channel A differential pairs\\ **eDP**: eDP_TX0+, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 151    | A76        | <color green>LVDS_A2-</color>                           | LVDS\\ EDP        | O LVDS\\  O PCIE              | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A2-, LVDS Channel A differential pairs\\ **eDP**: eDP_TX0-, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 153    | A77        | LVDS_VDD_EN                        | LVDS\\ EDP        | O CMOS                        | 3.3V/3.3V                                                        | PD 100K ???                                                      | **LVDS**: LVDS_VDD_EN, LVDS panel power enable\\ **eDP**: eDP_VDD_EN, eDP power enable                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 155    | A78        | <color green>LVDS_A3+</color>                           | LVDS              | O LVDS                        | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A3+, LVDS Channel A differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 157    | A79        | <color green>LVDS_A3-</color>                           | LVDS              | O LVDS                        | LVDS AC coupled off module                                                                                                        | **LVDS**: LVDS_A3-, LVDS Channel A differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 159    | A80        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 161    | A81        | <color cyan>LVDS_A_CK+</color>                         | LVDS\\ EDP         | O LVDS\\ O PCIE               | LVDS  AC coupled off module                                      |                                                                  | **LVDS**: LVDS_A_CK+, LVDS Channel A differential clock 20-80MHz ??? \\ **eDP**: eDP_TX3+, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 163    | A82        | <color cyan>LVDS_A_CK-</color>                         | LVDS\\ EDP         | O LVDS\\ O PCIE               | LVDS  AC coupled off module                                      |                                                                  | **LVDS**: LVDS_A_CK-, LVDS Channel A differential clock 20-80MHz ??? \\ **eDP**: eDP_TX3-, eDP differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 165    | A83        | <color magenta>LVDS_I2C_CK</color>                       | LVDS\\ EDP         | I/O OD CMOS\\ I/O PCIE        | 3.3V/3.3V AC coupled off module                                  | PU to 3.3V with 2.2K\\ ?                                         | **LVDS**: LVDS_I2C_CK, I2C clock output for LVDS display use\\ **eDP**: eDP_AUX+, eDP AUX+                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             |
 +| 167    | A84        | <color magenta>LVDS_I2C_DAT</color>                       | LVDS\\ EDP         | I/O OD CMOS\\ I/O PCIE        | 3.3V/3.3V AC coupled off module                                  | PU to 3.3V with 2.2K\\ ?                                         | **LVDS**: LVDS_I2C_DAT, I2C data line for LVDS display use\\ **eDP**: eDP_AUX-, eDP AUX-                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |
 +| 169    | A85        | GPI3                               | GPIO\\ SDIO       | I CMOS\\ IO CMOS              | 3.3V / 3.3V                                                      | PU 100K 3.3V (S0) ???\\ ?                                        | **GPIO**: GPI3, General purpose input pins. Pulled high internally on the Module.\\ **SDIO**: SDIO_DAT[3], SDIO Data lines. These signals operate in push-pull mode. Maps to GPI[0:3].                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 171    | A86        | RSVD                               | RSVD              | NC                            |                                                                  |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 173    | A87        | eDP_HPD                            | EDP               | I CMOS                        | 3.3V / 3.3V                                                      | PD 100K ???                                                      | Detection of Hot Plug / Unplug and notification of the link layer                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 175    | A88        | <color cyan>PCIE_CLK_REF+</color>                      | PCIE              | O PCIE                        | PCIE                                                                                                                              | Reference clock output for all PCI Express and PCI Express Graphics lanes. 100MHz                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 177    | A89        | <color cyan>PCIE_CLK_REF-</color>                      | PCIE              | O PCIE                        | PCIE                                                                                                                              | Reference clock output for all PCI Express and PCI Express Graphics lanes. 100MHz                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 179    | A90        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 181    | A91        | <color #ed1c24>SPI_POWER</color>   | SPI               | PWR OUTPUT                    | 3.3V Suspend or 3.3V S0 / 3.3V\\ 1.8V Suspend or 1.8V S0 / 3.3V  |                                                                  | Power supply for Carrier Board SPI – sourced from Module – nominally 3 3V. The Module shall provide a minimum of 100mA on SPI_POWER. Carriers shall use less than 100mA of SPI_POWER. SPI_POWER shall only be used to power SPI devices on the Carrier Board.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 183    | A92        | SPI_MISO                           | SPI               | I CMOS                        | 3.3V Suspend or 3.3V S0 / 3.3V\\ 1.8V Suspend or 1.8V S0 / 3.3V  | 33R Series Resistor ????                                         | Data in to Module from Carrier SPI                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 185    | A93        | GPO0                               | GPIO\\ SDIO         | O CMOS                        | 3.3V / 3.3V                                                      | PD 100K ???                                                      | **GPIO**: GPO0, General purpose output pins. Upon a hardware reset, these outputs should be low.\\ **SDIO**: SDIO_CLK, SDIO Clock. With each cycle of this signal a one-bit transfer on the command and each data line occurs. This signal has maximum frequency of 48 MHz. Maps to GPO0.                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 187    | A94        | SPI_CLK                            | SPI               | O CMOS                        | 3.3V Suspend or 3.3V S0 / 3.3V\\ 1.8V Suspend or 1.8V S0 / 3.3V  |                                                                  | Clock from Module to Carrier SPI                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 189    | A95        | SPI_MOSI                           | SPI               | O CMOS                        | 3.3V Suspend or 3.3V S0 / 3.3V\\ 1.8V Suspend or 1.8V S0 / 3.3V  |                                                                  | Data out from Module to Carrier SPI                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 191    | A96        | TPM_PP                             | MISC              | I CMOS                        | 3.3V / 3.3V                                                      | TPM_PP pull down??? Not Used ???                                 | Trusted Platform Module (TPM) Physical Presence pin. Active high. TPM chip has an internal pull down. This signal is used to indicate Physical Presence to the TPM.  Modules implementing a TPM shall pull down TPM_PP                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 193    | A97        | TYPE10#                            | MOD_TYPE          | PDS                                                                                            | PD with 47K                                                      | Dual use pin. Indicates to the Carrier Board that a Type 10 Module is installed. Indicates to the Carrier that a Rev 1.0 or a Rev 2.0/3.0 Module is installed.\\ TYPE10#\\ NC - Pin-out R2.0\\ PD - Pin-out Type 10 pull down to ground with 47K resistor\\ 12V - Pin-out R1.0\\ This pin is reclaimed from the VCC_12V pool. In R1.0 Modules this pin will connect to other VCC_12V pins. In R2 0 this pin is defined as a no connect for types 1-6. In R3.0 this pin is defined as a no connect for types 6 and 7. A Carrier can detect a R1.0 Module by the presence of 12V on this pin. R2.0 Module types 1-6 will no connect this pin. R3 0 Module types 6 and 7 will no connect this pin. Type 10 Modules shall pull this pin to ground through a 47K resistor.  |
 +| 195    | A98        | <color orange>SER0_TX</color>                            | SER\\ CAN???      | O CMOS-T                      | 3.3V / 12V                                                       | FET protect?                                                     | General purpose serial port transmitter, **PD on carrier board needed for proper operation ???**                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 197    | A99        | <color orange>SER0_RX</color>                            | SER\\ CAN???      | I CMOS-T                      | 3.3V / 12V                                                       | FET protect? PU 47K 3.3V (S0) ???                                | General purpose serial port receiver                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 199    | A100       | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 201    | A101       | <color orange>SER1_TX</color>                            | SER\\ CAN         | O CMOS-T                      | 3.3V / 12V                                                       | FET protect?                                                     | General purpose serial port transmitter This pin is shared with CAN_TX (refer to Section 4 3.30 'CAN Bus'), **PD on carrier board needed for proper operation ???**                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 203    | A102       | <color orange>SER1_RX</color>                            | SER\\ CAN         | I CMOS-T                      | 3.3V / 12V                                                       | FET protect? PU 10K 3.3V (S0) ???                                | General purpose serial port receiver This pin is shared with CAN_RX (refer to Section 4.3.30 'CAN Bus'                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |
 +| 205    | A103       | LID#                               | SYS           | I OD CMOS                     | 3.3V Suspend/ 12V                                                | PU to 3.3V Standby with 47K                                      | LID switch. Low active signal used by the ACPI operating system for a LID switch.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 207    | A104       | <color #ed1c24>VCC_12V</color>     | PWR               | PWR 4.75-20V                  |                                                                  |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 209    | A105       | <color #ed1c24>VCC_12V</color>     | PWR               | PWR 4.75-20V                  |                                                                  |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 211    | A106       | <color #ed1c24>VCC_12V</color>     | PWR               | PWR 4.75-20V                  |                                                                  |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 213    | A107       | <color #ed1c24>VCC_12V</color>     | PWR               | PWR 4.75-20V                  |                                                                  |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 215    | A108       | <color #ed1c24>VCC_12V</color>     | PWR               | PWR 4.75-20V                  |                                                                  |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 217    | A109       | <color #ed1c24>VCC_12V</color>     | PWR               | PWR 4.75-20V                  |                                                                  |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 219    | A110       | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 2      | B1         | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 4      | B2         | GBE0_ACT#                          | GBE               | OD CMOS                       | 3.3V Suspend/ 3 3V                                                                                                                | Gigabit Ethernet Controller 0 activity indicator, active low.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 6      | B3         | LPC_FRAME#/ESPI_CS0#               | LPC\\ ESPI          | O CMOS                        | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                                                                                          | **LPC**: LPC Frame indicates the start of a LPC cycle.\\ **ESPI**: eSPI Master Chip Select Outputs Driving Chip Select0#. A low selects a particular eSPI slave for the transaction. Each of the eSPI slaves is connected to a dedicated Chip Selectn# pin.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 8      | B4         | LPC_AD0/ESPI_IO_0                  | LPC\\ ESPI          | I/O CMOS                      | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ser 22R ???                                                      | **LPC**: LPC multiplexed address, command and data bus\\ **ESPI**: eSPI Master Data Input / Outputs These are bi-directional input/output pins used to transfer data between master and slaves. Multiplexed with LPC_AD[0:3]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 10     | B5         | LPC_AD1/ESPI_IO_1                  | LPC\\ ESPI          | I/O CMOS                      | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ser 22R ???                                                      | **LPC**: LPC multiplexed address, command and data bus\\ **ESPI**: eSPI Master Data Input / Outputs These are bi-directional input/output pins used to transfer data between master and slaves. Multiplexed with LPC_AD[0:3]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 12     | B6         | LPC_AD2/ESPI_IO_2                  | LPC\\ ESPI          | I/O CMOS                      | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ser 22R ???                                                      | **LPC**: LPC multiplexed address, command and data bus\\ **ESPI**: eSPI Master Data Input / Outputs These are bi-directional input/output pins used to transfer data between master and slaves. Multiplexed with LPC_AD[0:3]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 14     | B7         | LPC_AD3/ESPI_IO_3                  | LPC\\ ESPI          | I/O CMOS                      | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ser 22R ???                                                      | **LPC**: LPC multiplexed address, command and data bus\\ **ESPI**: eSPI Master Data Input / Outputs These are bi-directional input/output pins used to transfer data between master and slaves. Multiplexed with LPC_AD[0:3]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 16     | B8         | LPC_DRQ0#/ESPI_ALERT0#             | LPC\\ ESPI          | I CMOS                        | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ESPI: PU to 1.8V with 1K                                         | **LPC**: LPC serial DMA request\\ **ESPI**: eSPI pins used by eSPI slave to request service from the eSPI master.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 18     | B9         | LPC_DRQ1#/ESPI_ALERT1#             | LPC\\ ESPI          | I CMOS                        | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ESPI: PU to 1.8V with 1K                                         | **LPC**: LPC serial DMA request\\ **ESPI**: eSPI pins used by eSPI slave to request service from the eSPI master.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 20     | B10        | LPC_CLK/ESPI_CK                    | LPC\\ ESPI          | O CMOS                        | **LPC**:3.3V / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                         | ser 22R ???                                                      | **LPC**: LPC clock output, 33MHz\\ **ESPI**: eSPI Master Clock Output This pin provides the reference timing for all the serial input and output operations.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 22     | B11        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 24     | B12        | PWRBTN#                            | SYS           | I CMOS                        | 3.3V Suspend/ 3 3V                                               | PU to 3.3V Standby with 10K                                      | A falling edge creates a power button event. Power button events can be used to bring a system out of S5 soft off and other suspend states, as well as powering the system down.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 26     | B13        | <color magenta>SMB_CK</color>                            | SMBUS             | I/O OD CMOS                   | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 2.2K                                     | System Management Bus bidirectional clock line.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 28     | B14        | <color magenta>SMB_DAT</color>                            | SMBUS             | I/O OD CMOS                   | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 2.2K                                     | System Management Bus bidirectional data line.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 30     | B15        | SMB_ALERT#                         | SMBUS             | I CMOS                        | 3.3V Suspend/ 3.3V                                                                                                                | System Management Bus Alert – active low input can be used to generate an SMI# (System Management Interrupt) or to wake the system.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 32     | B16        | <color green>SATA1_TX+</color>                          | SATA              | O SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R, 10nf????                 | Serial ATA Channel 1 transmit differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 34     | B17        | <color green>SATA1_TX-</color>                          | SATA              | O SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R, 10nf????                 | Serial ATA Channel 1 transmit differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 36     | B18        | SUS_STAT#/ESPI_RESET#              | LPC\\ ESPI\\ SYS  | O CMOS                        | **LPC**:3.3V Suspend / 3.3V\\ **ESPI**:1.8V Suspend / 1.8V                                                                                  | **LPC**: SUS_STAT# indicates imminent suspend operation. It is used to notify LPC devices that a low power state will be entered soon. LPC devices may need to preserve memory or isolate outputs during the low power state. (See Power Management section 4.3.11 for details)\\ **ESPI**: eSPI Reset Reset the eSPI interface for both master and slaves. eSPI Reset# is typically driven from eSPI master to eSPI slaves.                                                                                                                                                                                                                                                                                                                                           |
 +| 38     | B19        | <color green>SATA1_RX+</color>                          | SATA              | I SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R, 10nf????                 | Serial ATA Channel 1 receive differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 40     | B20        | <color green>SATA1_RX-</color>                          | SATA              | I SATA                        | AC coupled on Module                                             | shall be AC coupled on the Module, 85R, 10nf????                 | Serial ATA Channel 1 receive differential pair.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 42     | B21        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 44     | B22        | <color green>USB_SSTX0-</color>                         | USB               | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module                                | Additional transmit signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 46     | B23        | <color green>USB_SSTX0+</color>                         | USB               | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module                                | Additional transmit signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 48     | B24        | PWR_OK                             | SYS           | I CMOS                        | 3.3V / 3.3V                                                      | Should be terminated by the Module ????                          | Power OK from main power supply. A high value indicates that the power is good. This signal can be used to hold off Module startup to allow Carrier based FPGAs or other configurable devices time to be programmed.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 50     | B25        | <color green>USB_SSTX1-</color>                         | USB               | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module                                | Additional transmit signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 52     | B26        | <color green>USB_SSTX1+</color>                         | USB               | O PCIE                        | AC coupled on Module                                             | shall be AC coupled on the Module                                | Additional transmit signal differential pairs for the SuperSpeed USB data path.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 54     | B27        | WDT                                | MISC              | O CMOS                        | 3.3V/ 3.3V                                                                                                                        | Output indicating that a watchdog time-out event has occurred. Refer to Section 5.7 'Watchdog Timer' on page 115 for details.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 56     | B28        | HDA_SDIN2                          | HDA               | I/O CMOS                      | 3.3V Suspend/ 3 3V                                                                                                                | Serial TDM data inputs from up to 3 CODECs.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 58     | B29        | HDA_SDIN1                          | HDA               | I/O CMOS                      | 3.3V Suspend/ 3 3V                                                                                                                | Serial TDM data inputs from up to 3 CODECs.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 60     | B30        | HDA_SDIN0                          | HDA               | I/O CMOS                      | 3.3V Suspend/ 3 3V                                                                                                                | Serial TDM data inputs from up to 3 CODECs.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 62     | B31        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 64     | B32        | SPKR                               | MISC              | O CMOS                        | 3.3V/ 3.3V                                                                                                                        | Output for audio enunciator - the "speaker" in PC-AT systems. This port provides the PC beep signal and is mostly intended for debugging purposes.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 66     | B33        | <color magenta>I2C_CK</color>                            | I2C               | I/O OD CMOS                   | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 2.2K                                     | General purpose I2C port clock output                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
 +| 68     | B34        | <color magenta>I2C_DAT</color>                            | I2C               | I/O OD CMOS                   | 3.3V Suspend/ 3.3V                                               | PU to 3.3V Standby with 2.2K                                     | General purpose I2C port data I/O line                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
 +| 70     | B35        | THRM#                              | THERMAL           | I CMOS                        | 3.3V / 3.3V                                                      |                                                                  | Input from off-Module temp sensor indicating an over-temp situation.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 72     | B36        | <color green>USB7-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 74     | B37        | <color green>USB7+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 76     | B38        | USB_4_5_OC#                        | USB               | I CMOS                        | 3.3V Suspend/ 3 3V                                               | PU to 3.3V Standby with 10K                                      | USB over-current sense, USB channels 4 and 5. A pull-up for this line shall be present on the Module. An open drain driver from a USB current monitor on the Carrier Board may drive this line low. Do not pull this line high on the Carrier Board.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 78     | B39        | <color green>USB5-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 80     | B40        | <color green>USB5+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 4 through 7. USB7 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 82     | B41        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 84     | B42        | <color green>USB3-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 86     | B43        | <color green>USB3+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 88     | B44        | USB_0_1_OC#                        | USB               | I CMOS                        | 3.3V Suspend/ 3 3V                                               | PU to 3.3V Standby with 10K                                      | USB over-current sense, USB channels 0 and 1. A pull-up for this line shall be present on the Module. An open drain driver from a USB current monitor on the Carrier Board may drive this line low. Do not pull this line high on the Carrier Board.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 90     | B45        | <color green>USB1-</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 92     | B46        | <color green>USB1+</color>                              | USB               | I/O USB                       | 3.3V Suspend/ 3 3V                                                                                                                | USB differential pairs, channels 0 through 3. For type 7 only, USB0 may be configured as a USB client or as a host, or both at the Module designer's discretion. All other USB ports, if implemented, shall be host ports                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
 +| 94     | B47        | ESPI_EN#                           | LPC\\ ESPI          | I CMOS                        | NA                                                               | PU to logic high with 20K                                        | This signal is used by he Carrier to indicate the operating mode of the LPC/eSPI bus. If left unconnected on he carrier, LPC mode (default) is selected. If pulled to GND on the carrier, eSPI mode is selected. This signal is pulled to a logic high on the module through a resistor. The Carrier should only float his line or pull it low.                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 96     | B48        | USB0_HOST_PRSNT                    | USB               | I CMOS                        | 3.3V Suspend/ 3 3V                                                                                                                | Module USB client may detect the presence of a USB host on USB0. A high value indicates that a host is present.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 98     | B49        | SYS_RESET#                         | SYS           | I CMOS                        | 3.3V Suspend/ 3 3V                                               | PU to 3.3V Standby with 10K                                      | Reset button input. Active low request for Module to reset and reboot. May be falling edge sensitive. For situations when SYS_RESET# is not able to reestablish control of the system, PWR_OK or a power cycle may be used.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 100    | B50        | CB_RESET#                          | SYS           | O CMOS                        | 3.3V Suspend/ 3 3V                                                                                                                | Reset output from Module to Carrier Board. Active low. Issued by Module chipset and may result from a low SYS_RESET# input, a low PWR_OK input, a VCC_12V power input that falls below the minimum specification, a watchdog timeout, or may be initiated by the Module software.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 102    | B51        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 104    | B52        | RSVD                               | RSVD              |                                                                                                |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 106    | B53        | RSVD                               | RSVD              |                                                                                                |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 108    | B54        | GPO1                               | GPIO\\ SDIO         | O CMOS                        | 3.3V / 3.3V                                                      |                                                                  | **GPIO**: GPO1, General purpose output pins. Upon a hardware reset, these outputs should be low.\\ **SDIO**: SDIO_CMD, SDIO Command/Response. This signal is used for card initialization and for command transfers. During initialization mode this signal is open drain. During command transfer this signal is in push-pull mode. Maps to GPO1.                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 110    | B55        | RSVD                               | RSVD              |                                                                                                |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 112    | B56        | RSVD                               | RSVD              |                                                                                                |                                                                  | RSVD pins are reserved for future use and should be no connect. Do not tie the RSVD pins together                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
 +| 114    | B57        | GPO2                               | GPIO\\ SDIO         | O CMOS  I CMOS                | 3.3V / 3.3V                                                      |                                                                  | **GPIO**: GPO2, General purpose output pins. Upon a hardware reset, these outputs should be low.\\ **SDIO**: SDIO_WP, SDIO Write Protect. This signal denotes the state of the write-protect tab on SD cards. Maps to GPO2; used as an input when used for SD card support.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 116    | B58        | <color green>PCIE_RX3+</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 118    | B59        | <color green>PCIE_RX3-</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 120    | B60        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 122    | B61        | <color green>PCIE_RX2+</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 124    | B62        | <color green>PCIE_RX2-</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 126    | B63        | GPO3                               | GPIO\\ SDIO         | O CMOS  I CMOS                | 3.3V / 3.3V                                                      |                                                                  | **GPIO**: GPO3, General purpose output pins. Upon a hardware reset, these outputs should be low.\\ **SDIO**: SDIO_CD#, SDIO Card Detect. This signal indicates when a SDIO/MMC card is present. Maps to GPO3; used as an input when used for SD card support.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 128    | B64        | <color green>PCIE_RX1+</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 130    | B65        | <color green>PCIE_RX1-</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 132    | B66        | WAKE0#                             | SYS           | I CMOS                        | 3.3V Suspend/ 3 3V                                               | PU to 3.3V Standby with 10K                                      | PCI Express wake up signal.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 134    | B67        | WAKE1#                             | SYS           | I CMOS                        | 3.3V Suspend/ 3 3V                                               | PU to 3.3V Standby with 10K                                      | General purpose wake up signal. May be used to implement wake-up on PS2 keyboard or mouse activity.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 136    | B68        | <color green>PCIE_RX0+</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 138    | B69        | <color green>PCIE_RX0-</color>                          | PCIE              | I PCIE                        | AC coupled off Module                                            | 85R                                                              | PCI Express Differential Receive Pairs 0 through 3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 140    | B70        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 142    | B71        | <color green>DDI0_PAIR0+</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE0+, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_DATA2+, HDMI/DVI TMDS lanes 0, 1 and 2 differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 144    | B72        | <color green>DDI0_PAIR0-</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE0-, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_DATA2-, HDMI/DVI TMDS lanes 0, 1 and 2 differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 146    | B73        | <color green>DDI0_PAIR1+</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE1+, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_DATA1+, HDMI/DVI TMDS lanes 0, 1 and 2 differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 148    | B74        | <color green>DDI0_PAIR1-</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE1-, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_DATA1-, HDMI/DVI TMDS lanes 0, 1 and 2 differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 150    | B75        | <color green>DDI0_PAIR2+</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE2-, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_DATA0-, HDMI/DVI TMDS lanes 0, 1 and 2 differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 152    | B76        | <color green>DDI0_PAIR2-</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE2-, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_DATA0-, HDMI/DVI TMDS lanes 0, 1 and 2 differential pairs                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 154    | B77        | <color green>DDI0_PAIR4+</color>                        | RSVD              |                                                                                                |                                                                  | ????                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 156    | B78        | <color green>DDI0_PAIR4-</color>                        | RSVD              |                                                                                                |                                                                  | ????                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 158    | B79        | LVDS_BKLT_EN                       | LVDS\\ EDP          | O CMOS                        | 3.3V/3.3V                                                        |                                                                  | **LVDS**: LVDS_BKLT_EN, LVDS panel backlight enable\\ **eDP**: eDP_BKLT_EN, eDP backlight enable                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
 +| 160    | B80        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 162    | B81        | <color green>DDI0_PAIR3+</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE3+, Uni-directional main link for the transport of isochronous streams and secondarydata packets\\ **HDMI**: TMDS0_CLK+, HDMI/DVI TMDS Clock differential pair                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    |
 +| 164    | B82        | <color green>DDI0_PAIR3-</color>                        | DDI               | O PCIE                        | AC coupled off Module                                            |                                                                  | DDI 0 Pair[0:3] differential pairs\\ **DP**: DP0_LANE3-, Uni-directional main link for the transport of isochronous streams and secondary data packets\\ **HDMI**: TMDS0_CLK-, HDMI/DVI TMDS Clock differential pair                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 166    | B83        | LVDS_BKLT_CTRL                     | LVDS\\ EDP          | O CMOS                        | 3.3V/3.3V                                                        |                                                                  | **LVDS**: LVDS_BKLT_CTRL, LVDS panel backlight brightness control\\ **eDP**: eDP_BKLT_CTRL, eDP backlight brightness control                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 168    | B84        | <color #ed1c24>VCC_5V_SBY</color>  | PWR                                                                                                              |                                                                  | Standby power input: +5.0V nominal. Refer to Section 7 “Electrical Specifications“ for allowable input range. If VCC5_SBY is used, all available VCC_5V_SBY pins on the connector(s) shall be used. Only used for standby and suspend functions. May be left unconnected if these functions are not used in the system design.                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 170    | B85        | <color #ed1c24>VCC_5V_SBY</color>  | PWR                                                                                                              |                                                                  | Standby power input: +5.0V nominal. Refer to Section 7 “Electrical Specifications“ for allowable input range. If VCC5_SBY is used, all available VCC_5V_SBY pins on the connector(s) shall be used. Only used for standby and suspend functions. May be left unconnected if these functions are not used in the system design.                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 172    | B86        | <color #ed1c24>VCC_5V_SBY</color>  | PWR                                                                                                              |                                                                  | Standby power input: +5.0V nominal. Refer to Section 7 “Electrical Specifications“ for allowable input range. If VCC5_SBY is used, all available VCC_5V_SBY pins on the connector(s) shall be used. Only used for standby and suspend functions. May be left unconnected if these functions are not used in the system design.                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 174    | B87        | <color #ed1c24>VCC_5V_SBY</color>  | PWR                                                                                                              |                                                                  | Standby power input: +5.0V nominal. Refer to Section 7 “Electrical Specifications“ for allowable input range. If VCC5_SBY is used, all available VCC_5V_SBY pins on the connector(s) shall be used. Only used for standby and suspend functions. May be left unconnected if these functions are not used in the system design.                                                                                                                                                                                                                                                                                                                                                                                                                                         |
 +| 176    | B88        | BIOS_DIS1#                         | LPC\\ ESPI          | I CMOS                        | NA                                                               | PU to 3.3V with 10K                                              | Selection strap to determine the BIOS boot device. The Carrier should only float these or pull them low, please refer to Table 4.13 for strapping options of BIOS disable signals.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
 +| 178    | B89        | DDI0_HPD                           | DDI               | I CMOS                        | 3.3V / 3.3V                                                      |                                                                  | DDI Hot-Plug Detect\\ **DP**: DP0_HPD Detection of Hot Plug / Unplug and notification of the link layer\\ **HDMI**: HDMI0_HPD, HDMI/DVI Hot-Plug Detect                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                |
 +| 180    | B90        | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 182    | B91        | <color green>DDI0_PAIR5+</color>                        | RSVD              |                                                                                                |                                                                  | ????                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 184    | B92        | <color green>DDI0_PAIR5-</color>                        | RSVD              |                                                                                                |                                                                  | ????                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 186    | B93        | <color green>DDI0_PAIR6+</color>                        | RSVD              |                                                                                                |                                                                  | ????                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 188    | B94        | <color green>DDI0_PAIR6-</color>                        | RSVD              |                                                                                                |                                                                  | ????                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
 +| 190    | B95        | DDI0_DDC_AUX_SEL                   | DDI               | I CMOS                        | 3.3V / 3.3V                                                      | PD with 1M                                                       | Selects the function of DDI[0]_CTRLCLK_AUX+ and DDI[0]_CTRLDATA_AUX-. This pin shall have a 1M pull-down to logic ground on the Module. If this input is unconnected the AUX pair is used for the DP AUX+/- signals. If pulled-high the AUX pair contains the CRTLCLK and CTRLDATA signals.                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 192    | B96        | USB7_HOST_PRSNT                    | USB               | I CMOS                        | 3.3V Suspend/ 3 3V                                                                                                                | Module USB client may detect the presence of a USB host on USB7. A high value indicates that a host is present.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 194    | B97        | SPI_CS#                            | SPI               | O CMOS                        | 3.3V Suspend or 3.3V S0 / 3.3V\\  1.8V Suspend or 1.8V S0 / 3.3V                                                                    | Chip select for Carrier Board SPI - may be sourced from chipset SPI0 or SPI1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 196    | B98        | DDI0_CTRLCLK_AUX+                  | DDI               | I/O PCIE\\ I/O OD CMOS        | **DP**: AC coupled on Module\\ **HDMI**: 3.3V / 3.3V                     | AC 100nF?                                                        | **DP**: DP AUX+ function if DDI[0]_DDC_AUX_SEL is no connect, Half-duplex bi-directional AUX channel for services such as link configuration or maintenance and EDID access\\ **HDMI**: HDMI/DVI I2C CTRLCLK if DDI[0]_DDC_AUX_SEL is pulled high, HDMI/DVI I2C control clock                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 198    | B99        | DDI0_CTRLDATA_AUX-                 | DDI               | I/O PCIE\\ I/O OD CMOS        | **DP**: AC coupled on Module\\ **HDMI**: 3.3V / 3.3V                     | AC 100nF?                                                        | **DP**: DP AUX- function if DDI[0]_DDC_AUX_SEL is no connect, Half-duplex bi-directional AUX channel for services such as link configuration or maintenance and EDID access\\ **HDMI**: HDMI/DVI I2C CTRLDATA if DDI[0]_DDC_AUX_SEL is pulled high, HDMI/DVI I2C control data                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          |
 +| 200    | B100       | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +| 202    | B101       | FAN_PWMOUT                         | MISC              | O OD CMOS                     | 3.3V/ 12V                                                        |                                                                  | Fan speed control. Uses the Pulse Width Modulation (PWM) technique to control the fan’s RPM.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 204    | B102       | FAN_TACHIN                         | MISC              | O OD CMOS                     | 3.3V/ 12V                                                        | PU to 3.3V with 47K                                              | Fan tachometer input for a fan with a two pulse output.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                |
 +| 206    | B103       | SLEEP#                             | SYS           | I OD CMOS                     | 3.3V Suspend/ 12V                                                | PU to 3.3V Standby with 47K                                      | Sleep button. Low active signal used by the ACPI operating system to bring the system to sleep state or to wake it up again.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
 +| 208    | B104       | <color #ed1c24>VCC_12V</color>     | PWR                                                                                                              |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 210    | B105       | <color #ed1c24>VCC_12V</color>     | PWR                                                                                                              |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 212    | B106       | <color #ed1c24>VCC_12V</color>     | PWR                                                                                                              |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 214    | B107       | <color #ed1c24>VCC_12V</color>     | PWR                                                                                                              |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 216    | B108       | <color #ed1c24>VCC_12V</color>     | PWR                                                                                                              |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 218    | B109       | <color #ed1c24>VCC_12V</color>     | PWR                                                                                                              |                                                                  | %%msg_vcc_12v%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        |
 +| 220    | B110       | <color blue>GND(FIXED)</color>     | PWR                                                                                                              |                                                                  | %%msg_gnd%%                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
 +
 +
 +
 +==== Разъём CD ====
wiki/ff/comexpress/start.1749123186.txt.gz · Последнее изменение: 2025/06/05 11:33 — Roman Abakumov