Содержание

SIM card

https://en.wikipedia.org/wiki/SIM_card

Form factors

From left, full-size SIM (1FF), mini-SIM (2FF), micro-SIM (3FF), and nano-SIM (4FF)
SIM card format Introduced Standard reference Length Width Thickness
Full-size (1FF) 1991 ISO/IEC 7810:2003, ID-1 85.6 mm
(3.37 in) 		53.98 mm
(2.125 in) 		0.76 mm
(0.030 in)
Mini-SIM (2FF) 1996 ISO/IEC 7810:2003, ID-000 25 mm
(0.98 in) 		15 mm
(0.59 in) 		0.76 mm
(0.030 in) 		mini-sim-dims.jpg
Micro-SIM (3FF) 2003 ETSI TS 102 221 V9.0.0, Mini-UICC 15 mm
(0.59 in) 		12 mm
(0.47 in) 		0.76 mm
(0.030 in)
Nano-SIM (4FF) early 2012 ETSI TS 102 221 V11.0.0 12.3 mm
(0.48 in) 		8.8 mm
(0.35 in) 		0.67 mm
(0.026 in) 		nano-sim-drawing.jpg
Embedded-SIM (eSIM) 2016 ETSI TS 102.671 V9.0.0
JEDEC Design Guide 4.8, SON-8
GSMA SGP.22 V1.0 		— — —

Connectors

PUSH-PUSH with ejection mechanizm
PUSH-PULL no ejection mechanizm
HINGE no ejection mechanizm sim-hinge.jpg
GUIDE AND HOLDER
KLS https://www.klsele.com/products/connectors/Card-connectors/SIM-card-connectors.html
KLS https://www.klsele.com/products/connectors/Card-connectors/Micro-SIM-card-connectors.html
KLS https://www.klsele.com/products/connectors/Card-connectors/Nano-SIM-card-connectors.html
HSM
Connfly
Attend

Pinout

At first we need to understand SIM Pinouts:

Contact No Assignment Description
C1 VCC Power Voltage.
C2 RST Reset Signal.
C3 CLK Clocking Signal.
C4 RFU Reserved for Feature Use.
C5 GND Power and Signal Ground.
C6 VPP Programming Voltage.
C7 I/O Serial Data input/output.
C8 RFU Reserved for Feature Use