====== SIM card ====== https://en.wikipedia.org/wiki/SIM_card ===== Form factors ===== {{tablelayout?rowsHeaderSource=Auto}} | {{:wiki:if:sim:sim_cards_formfactors.png?800&direct}} | | From left, full-size SIM (1FF), mini-SIM (2FF), micro-SIM (3FF), and nano-SIM (4FF) | {{tablelayout?rowsHeaderSource=Auto&colwidth=",103px"}} ^ SIM card format ^ Introduced ^ Standard reference ^ Length ^ Width ^ Thickness ^ ^ | Full-size (1FF) | 1991 | ISO/IEC 7810:2003, ID-1 | 85.6 mm\\ (3.37 in) | 53.98 mm\\ (2.125 in) | 0.76 mm\\ (0.030 in) | | | Mini-SIM (2FF) | 1996 | ISO/IEC 7810:2003, ID-000 | 25 mm\\ (0.98 in) | 15 mm\\ (0.59 in) | 0.76 mm\\ (0.030 in) | {{:wiki:if:sim:mini-sim-dims.jpg?240&direct}} | | Micro-SIM (3FF) | 2003 | ETSI TS 102 221 V9.0.0, Mini-UICC | 15 mm\\ (0.59 in) | 12 mm\\ (0.47 in) | 0.76 mm\\ (0.030 in) | {{:wiki:if:sim:micro-sim-dims.png?128&direct}} | | Nano-SIM (4FF) | early 2012 | ETSI TS 102 221 V11.0.0 | 12.3 mm\\ (0.48 in) | 8.8 mm\\ (0.35 in) | 0.67 mm\\ (0.026 in) | {{:wiki:if:sim:nano-sim-drawing.jpg?128&direct}} | | Embedded-SIM (eSIM) | 2016 | ETSI TS 102.671 V9.0.0\\ JEDEC Design Guide 4.8, SON-8\\ GSMA SGP.22 V1.0 | — | — | — | | ===== Connectors ===== | PUSH-PUSH | with ejection mechanizm | | | PUSH-PULL | no ejection mechanizm | | | HINGE | no ejection mechanizm | {{:wiki:if:sim:sim-hinge.jpg?128&direct}} | | GUIDE AND HOLDER | | | | KLS | https://www.klsele.com/products/connectors/Card-connectors/SIM-card-connectors.html | | KLS | https://www.klsele.com/products/connectors/Card-connectors/Micro-SIM-card-connectors.html | | KLS | https://www.klsele.com/products/connectors/Card-connectors/Nano-SIM-card-connectors.html | | HSM | | | Connfly | | | Attend | | ===== Pinout ===== At first we need to understand SIM Pinouts: * 6-pin includes VCC, GND, I/O, VPP, RST, CLK * 8-pin includes VCC, GND, I/O, VPP, RST, CLK, SIM_PRESENCE, GND {{tablelayout?rowsHeaderSource=Auto&colwidth=""}} ^ Contact No ^ Assignment ^ Description ^ | C1 | VCC | Power Voltage. | | C2 | RST | Reset Signal. | | C3 | CLK | Clocking Signal. | | C4 | RFU | Reserved for Feature Use. | | C5 | GND | Power and Signal Ground. | | C6 | VPP | Programming Voltage. | | C7 | I/O | Serial Data input/output. | | C8 | RFU | Reserved for Feature Use |